 
Hudson’s
micro1
Robotic Benchtop Dispenser provides a combination of fast filling speeds, high
accuracy, and extreme flexibility ordinarily found only among large, expensive
liquid-handling robots. The micro1 dispenses liquids in volumes down to 1:L
per well with CVs of 10%, and is the only small dispenser capable of tip-touchoff
to ensure a clean dispense of high surface-tension fluids. Its
positive-displacement pump head is adjustable in increments of 10nL, and never
requires recalibration.
|
|
Like
its larger cousin the micro10, Hudson’s
micro1
represents
a new generation in benchtop liquid dispensers. It has full robotic control of
the filler head, and automatically adjusts to the height AND well-pattern of any
SBS-standard microplate: from low-profile 1536-well plates to tall, 96-well
deep-well plates.
The
micro1
can be
loaded and operated manually, but is also fully-compatible with robot loading
systems (such as Hudson’s
PlateCrane EX). And, because
the filler head itself moves, not the plate, it can be used IN-LINE with
Hudson’s LabLinx
high-performance track system for unparalleled throughput and
ease of setup.
The
micro1
offers:
n
Touch Screen programming on an LCD Display
n
Graphic
Image Row Selection
n
96-, 384- and
1536-well filling
n
1:L
to 20:L
volumes; <10% CV at 1:L
n
50% faster than
8-tip dispensers
n
Tip Touch capability to
touch-off droplets
Hudson’s micro1
was
designed to meet the needs of high throughput laborotary dispensing requiring
economical, highly-accurate
:L-level
dispensing. Its positive-displacement pump head and tip-touchoff capability
overcomes differences in fluid viscosity and surface tension so that results are
consistent regardless of the fluid being dispensed.
|
|
